1-855-864-6281

Express Service

(305) 716-0358

6 Economy Recycled Rubber Heavy Duty Speed Bump

6’ Economy Recycled Rubber Heavy Duty Speed Bump

Premium Recycled Rubber Safety-Striped Speed Hump

Premium Recycled Rubber Safety-Striped Speed Hump

Recycled Rubber Speed Hump

Recycled Rubber Speed Hump

Heavy Duty Rubber Speed Hump

Heavy Duty Rubber Speed Hump

Safety first! That´s what we keep in our minds when we design and manufacture our Drive Speed bumps. What is a speed bump anyway? Speed bumps are devices that use vertical deflection to slow motor-vehicle traffic in order to improve safety conditions. The use of vertical deflection devices is widespread around the world, and they are most commonly found to enforce a speed limit under 25 mph or lower.

Although speed bumps are effective in keeping vehicle speeds down, their use is sometimes controversial as they can increase traffic noise, may damage vehicles if traveled at a great speed. Poorly-designed speed bumps that stand too tall or with too-sharp an angle can be disruptive for drivers, and may be difficult to navigate for vehicles with low ground clearance; even at very low speeds. Speed bumps can also pose serious hazards to motorcyclists and bicyclists if they are not very visible.

We have been manufacturing these devices for over 30 years now, and we have developed our “know how”. Therefore, nowadays we know how to make great traffic speed bumps that would never damage a vehicle, that are highly visible, and that keep doing the job of slowing down motor-vehicles. Each of these devices can be made from a variety of materials, including asphalt, concrete, recycled plastic, metal or vulcanized rubber. Traditionally most speed bumps have been constructed of asphalt or concrete due to the rigidity and durability of these materials, that became a problem. Since these materials are difficult to shape and form into consistent forms and precise dimensions, the result was speed bumps that were bad for cars and motorcycles.

What we create is a much more sophisticated version of those speed bumps. We make rubber products that are pre-shaped to standard sizes to meet industry requirements. Preformed rubber products are typically bolted down, making them easier to install or remove and they don’t damage motor-vehicles at all.

If you want to know more about our speed bumps, please feel free to contact us. You may call to the phone number shown at the header of this site and contact our sales department. One of our representatives can guide you to get the product that really suits your needs and budget.

 

6’ Economy Recycled Rubber Heavy Duty Speed Bump
SKU Description Length Height Width Weight
SB206FT 6 Ft Speed Bump (1) 6′ Section With no End Caps 72″ 2″ 12″ 48.40
SB207FT 7 Ft Speed Bump (1) 6′ Section + (2) End Caps 86″ 2″ 12″ 55.40
SB213FT Single Lane 12 Ft Speed Bump (2) 6′ Section With no End Caps 144″ 2″ 12″ 96.80
SB219FT Double lane 19 Ft Speed Bump (3) 6′ Section + (2) End Caps 230″ 2″ 12″ 152.20
SB225FT 25 Ft Speed Bump (4) 6′ Section + (2) End Caps 302″ 2″ 12″ 200.60
SB2ECAP End cap 7′ 2′ 12′ 3.50
Premium Recycled Rubber Safety-Striped 
SKU Description Length Height Width Weight
SB3039I 39″ Speed Bump (1) 39″ Section With no End Caps 39″ 2″ 13.7″ 36.20
SB3117I 117″ Single Lane Speed Bump (3) 39″ Sections With no End Caps 117″ 2″ 13.7″ 108.60
SB3137I 137″ Single Lane Speed Bump (3) 39″ Sections + (2) End Caps 137″ 2″ 13.7″ 124.20
SB3234I 234″ Double lane Speed Bump (6) 39″ Sections With no End Caps 234″ 2″ 13.7″ 217.20
SB3254I-2 254″ Double Lane Speed Bump (6) 39″ Sections + (2) End Caps 254″ 2″ 13.7″ 232.80
SB3ECAP-2 End cap 10″ 2″ 13.7″ 7.80
Recycled Rubber Speed Hump
SKU Description Length Height Width Weight
SH1018I 18.75″ Speed Bump (1) 18.75″ Section with no End Caps 18.75″ 1.25″ 2″ 22.20
SH1112I 112.5″ Single Lane Speed Bump (6) 18.75″ Sections with no End Caps 112.5″ 1.25″ 2″ 133.20
SH1128I 10 Ft Single Lane Speed Bump (6) 18.75″ Sections + (2) End Caps 128.5 1.25″ 2″ 148.80
SH1225I 225″ Double Lane Speed Bump (12) 18.75″ Sections with no End Caps 225″ 1.25″ 2″ 266.40
SH1241I 20 Ft Double Lane Speed Bump (12) 18.75″ Sections + (2) End Caps 241″ 1.25″ 2″ 282.00
SH1ECAL LEFT End Cap 8″ 1.25″ 2′ 7.80
SH1ECAR RIGHT End Cap 8″ 1.25″ 2′ 7.80
Heavy Duty Rubber Speed Hump
SKU Description Length Height Width Weight
SH2019I 19.75″ Speed Bump (1) 19.75″ Section With no End Caps 19.75″ 2″ 3″ 48.00
SH2121I 10 Ft Single Lane Speed Bump (5) 19.75″ Sections + (2) End Caps 121.75″ 2″ 3″ 273.00
SH2240I 20 Ft Double Lane Speed Bump (11) 19.75″ + (2) End Caps 240″ 2″ 3″ 561.00
SH2ECAL LEFT End cap 11.5″ 2″ 3′ 16.00
SH2ECAR RIGHT End cap 11.5″ 2″ 3′ 16.00